Transfer time

How Long Does It Take to Upload 10 GB at 10 Mbps?

Uploading or downloading a 10 GB file at 10 Mbps takes about 2 hours 13 minutes, assuming the full speed is sustained.

By the HeftySend team Last updated 8 October 2026 Free, no sign-up

Upload or download time

2 h 13 min

10 Mbps is 1.25 MB/s. 10 GB is 10,000 MB, and 10,000 ÷ 1.25 = 8,000 seconds.

With 10% protocol overhead: about 2 hours 26 minutes. Assumes the speed holds for the whole transfer.

Calculate your own

Different file size, a speed in MB/s or Gbps, or the 10% overhead switched on? The calculator opens pre-filled with 10 GB and 10 Mbps; change either value and the answer and both reference tables update.

Open the calculator: 10 GB at 10 Mbps

Works without JavaScript; the result is in the page when it loads.

What 10 GB actually is

Ten gigabytes is a feature-length film in 1080p at a streaming-quality bitrate, about 25 minutes of 4K footage straight from a camera, a season of a podcast in lossless audio, or an average phone photo library. It is the calculator's default example and the most-searched transfer size, because it is the first size that takes real time on an ordinary connection.

Ten gigabytes is also where upload direction matters most in day-to-day work: video editors, photographers and agencies hand over files this size constantly, nearly always from a home or office connection whose upload speed is a fraction of its download speed. The figures on this page assume the speed you measured, not the one on the bill.

4K video (55 Mbps): about 24 minutes
1080p video (15 Mbps): about 1.5 hours
RAW photos (40 MB each): about 250
25 MB email attachments: about 400

What 10 Mbps actually is

10 Mbps is what the upload side of many cable and FTTC/VDSL plans actually delivers, a typical 4G upload indoors, and about the download speed of a good ADSL2+ line. It moves 1.25 MB of file data a second, so a megabyte takes a little under a second and a gigabyte a little over thirteen minutes.

Is 10 Mbps a realistic upload speed? As an upload speed it is realistic, even common: run a speed test on a plan sold as "100 Mbps" cable and 10 Mbps up is a normal result. As a download speed it is slow by today's standards; if that is all you measure, you are on ADSL, a congested mobile cell or Wi-Fi at the edge of its range.

10 GB at other speeds, and other sizes at 10 Mbps

The first table keeps the file at 10 GB and changes the speed; the second keeps the speed at 10 Mbps and changes the file. Rows with their own write-up are linked. Every row is also written out as a sentence under "In words".

10 GB at neighbouring connection speeds
Connection speed	Time for 10 GB
10 Mbps	2 h 13 min
25 Mbps	53 min 20 s
50 Mbps	26 min 40 s
100 Mbps	13 min 20 s
500 Mbps	2 min 40 s

In words

10 GB at 10 Mbps takes about 2 hours 13 minutes.
10 GB at 25 Mbps takes about 53 minutes 20 seconds.
10 GB at 50 Mbps takes about 26 minutes 40 seconds.
10 GB at 100 Mbps takes about 13 minutes 20 seconds.
10 GB at 500 Mbps takes about 2 minutes 40 seconds.

Neighbouring file sizes at 10 Mbps
File size	Time at 10 Mbps
2 GB	26 min 40 s
5 GB	1 h 6 min
10 GB	2 h 13 min
20 GB	4 h 26 min
50 GB	11 h 6 min

In words

2 GB at 10 Mbps takes about 26 minutes 40 seconds.
5 GB at 10 Mbps takes about 1 hour 6 minutes.
10 GB at 10 Mbps takes about 2 hours 13 minutes.
20 GB at 10 Mbps takes about 4 hours 26 minutes.
50 GB at 10 Mbps takes about 11 hours 6 minutes.

Why it usually takes longer than 2 hours 13 minutes

Protocol overhead

The headline figure assumes every bit of the 10 Mbps carries file data. In practice TCP/IP headers, TLS and HTTP framing take 5–10% of the link, so a more realistic estimate for 10 GB at 10 Mbps is about 2 hours 26 minutes with 10% overhead, 13 minutes 20 seconds longer. Quote that figure when someone is waiting for the file.

Upload is not download

The formula gives the same 2 hours 13 minutes for an upload and a download, but the speed you should plug in is rarely the same. 10 Mbps is usually the download speed of a plan; on an asymmetric cable, 4G or satellite link the upload side of that plan is often around 1 Mbps, which turns 2 hours 13 minutes into about 22 hours 13 minutes for the same 10 GB. When you are the one sending, run a speed test and use the upload number.

Dropped connections

Over 2 hours 13 minutes something can interrupt the transfer: a Wi-Fi roam, a laptop lid, a mobile hand-off between masts. A plain browser upload starts again from zero; a transfer that uploads in parts and resumes from the last confirmed part loses seconds. HeftySend uploads are resumable by default; the single button below takes you to the uploader.

Sending something big? Let it survive a dropped connection.

HeftySend uploads in parts and resumes from the last confirmed part, so a Wi-Fi blip or a sleeping laptop costs seconds, not the whole transfer. No account needed for transfers up to 100 GB.

Send up to 100 GB free

Frequently asked questions

How long does it take to download 10 GB at 10 Mbps?

About 2 hours 13 minutes, the same as uploading, because the formula is file size divided by speed in both directions. The practical difference is that 10 Mbps is far more likely to be a real download speed than a real upload speed: plans advertise the download figure, and on cable, 4G and satellite the upload side is a fraction of it. If you are downloading 10 GB on a 10 Mbps plan, this estimate is usually close; if you are uploading, measure your upload speed first.

How long does 10 GB take at 10 Mbps with protocol overhead?

About 2 hours 26 minutes once you allow 10% for TCP/IP headers, TLS and HTTP framing, which is 13 minutes 20 seconds longer than the raw 2 hours 13 minutes. Real transfers lose 5–10% of the link rate to that framing, so the overhead figure is the better one to quote when someone asks when 10 GB will arrive.

What if my connection only manages half of 10 Mbps while sending 10 GB?

Transfer time scales directly with speed: at 5 Mbps the same 10 GB takes about 4 hours 26 minutes, and at 2.5 Mbps about 8 hours 53 minutes. Wi-Fi, other devices on the network, a busy receiving server or a laptop on battery can each take a connection well below its headline figure, so a speed test taken right before you send is the only reliable input.

How many megabytes per second is 10 Mbps, and how does that give 2 hours 13 minutes for 10 GB?

10 Mbps is 1.25 MB/s, because there are 8 bits in a byte. 10 GB is 10,000 MB, and 10,000 ÷ 1.25 = 8,000 seconds, which is 2 hours 13 minutes. The calculator uses decimal units (1 GB = 1,000 MB); a file that Windows reports as 10 GB is about 7% larger in decimal terms and takes correspondingly longer.