Transfer time

How Long Does It Take to Upload 2 GB at 10 Mbps?

Uploading or downloading a 2 GB file at 10 Mbps takes about 26 minutes 40 seconds, assuming the full speed is sustained.

By the HeftySend team Last updated 8 October 2026 Free, no sign-up

Upload or download time

26 min 40 s

10 Mbps is 1.25 MB/s. 2 GB is 2,000 MB, and 2,000 ÷ 1.25 = 1,600 seconds.

With 10% protocol overhead: about 29 minutes 20 seconds. Assumes the speed holds for the whole transfer.

Calculate your own

Different file size, a speed in MB/s or Gbps, or the 10% overhead switched on? The calculator opens pre-filled with 2 GB and 10 Mbps; change either value and the answer and both reference tables update.

Open the calculator: 2 GB at 10 Mbps

Works without JavaScript; the result is in the page when it loads.

What 2 GB actually is

Two gigabytes is a zipped design, code or document project, an hour-long interview recorded as WAV, a short film exported in a delivery codec, or a phone's worth of holiday photos. It is also a common ceiling for free transfer services and attachment-style sharing, so it is the point where people start looking for a proper transfer tool.

Files this size usually travel as one archive, which means a dropped connection on a non-resumable upload throws away everything sent so far. On any link slower than about 50 Mbps that risk is real, so a transfer that uploads in parts and resumes is worth having even for a couple of gigabytes.

4K video (55 Mbps): about 5 minutes
1080p video (15 Mbps): about 18 minutes
RAW photos (40 MB each): about 50
25 MB email attachments: about 80

What 10 Mbps actually is

10 Mbps is what the upload side of many cable and FTTC/VDSL plans actually delivers, a typical 4G upload indoors, and about the download speed of a good ADSL2+ line. It moves 1.25 MB of file data a second, so a megabyte takes a little under a second and a gigabyte a little over thirteen minutes.

Is 10 Mbps a realistic upload speed? As an upload speed it is realistic, even common: run a speed test on a plan sold as "100 Mbps" cable and 10 Mbps up is a normal result. As a download speed it is slow by today's standards; if that is all you measure, you are on ADSL, a congested mobile cell or Wi-Fi at the edge of its range.

2 GB at other speeds, and other sizes at 10 Mbps

The first table keeps the file at 2 GB and changes the speed; the second keeps the speed at 10 Mbps and changes the file. Rows with their own write-up are linked. Every row is also written out as a sentence under "In words".

2 GB at neighbouring connection speeds
Connection speed	Time for 2 GB
10 Mbps	26 min 40 s
25 Mbps	10 min 40 s
50 Mbps	5 min 20 s
100 Mbps	2 min 40 s
500 Mbps	32 s

In words

2 GB at 10 Mbps takes about 26 minutes 40 seconds.
2 GB at 25 Mbps takes about 10 minutes 40 seconds.
2 GB at 50 Mbps takes about 5 minutes 20 seconds.
2 GB at 100 Mbps takes about 2 minutes 40 seconds.
2 GB at 500 Mbps takes about 32 seconds.

Neighbouring file sizes at 10 Mbps
File size	Time at 10 Mbps
1 GB	13 min 20 s
2 GB	26 min 40 s
5 GB	1 h 6 min
10 GB	2 h 13 min
20 GB	4 h 26 min

In words

1 GB at 10 Mbps takes about 13 minutes 20 seconds.
2 GB at 10 Mbps takes about 26 minutes 40 seconds.
5 GB at 10 Mbps takes about 1 hour 6 minutes.
10 GB at 10 Mbps takes about 2 hours 13 minutes.
20 GB at 10 Mbps takes about 4 hours 26 minutes.

Why it usually takes longer than 26 minutes 40 seconds

Protocol overhead

The headline figure assumes every bit of the 10 Mbps carries file data. In practice TCP/IP headers, TLS and HTTP framing take 5–10% of the link, so a more realistic estimate for 2 GB at 10 Mbps is about 29 minutes 20 seconds with 10% overhead, 2 minutes 40 seconds longer. Quote that figure when someone is waiting for the file.

Upload is not download

The formula gives the same 26 minutes 40 seconds for an upload and a download, but the speed you should plug in is rarely the same. 10 Mbps is usually the download speed of a plan; on an asymmetric cable, 4G or satellite link the upload side of that plan is often around 1 Mbps, which turns 26 minutes 40 seconds into about 4 hours 26 minutes for the same 2 GB. When you are the one sending, run a speed test and use the upload number.

Dropped connections

Over 26 minutes 40 seconds something can interrupt the transfer: a Wi-Fi roam, a laptop lid, a mobile hand-off between masts. A plain browser upload starts again from zero; a transfer that uploads in parts and resumes from the last confirmed part loses seconds. HeftySend uploads are resumable by default; the single button below takes you to the uploader.

Sending something big? Let it survive a dropped connection.

HeftySend uploads in parts and resumes from the last confirmed part, so a Wi-Fi blip or a sleeping laptop costs seconds, not the whole transfer. No account needed for transfers up to 100 GB.

Send up to 100 GB free

Frequently asked questions

How long does it take to download 2 GB at 10 Mbps?

About 26 minutes 40 seconds, the same as uploading, because the formula is file size divided by speed in both directions. The practical difference is that 10 Mbps is far more likely to be a real download speed than a real upload speed: plans advertise the download figure, and on cable, 4G and satellite the upload side is a fraction of it. If you are downloading 2 GB on a 10 Mbps plan, this estimate is usually close; if you are uploading, measure your upload speed first.

How long does 2 GB take at 10 Mbps with protocol overhead?

About 29 minutes 20 seconds once you allow 10% for TCP/IP headers, TLS and HTTP framing, which is 2 minutes 40 seconds longer than the raw 26 minutes 40 seconds. Real transfers lose 5–10% of the link rate to that framing, so the overhead figure is the better one to quote when someone asks when 2 GB will arrive.

What if my connection only manages half of 10 Mbps while sending 2 GB?

Transfer time scales directly with speed: at 5 Mbps the same 2 GB takes about 53 minutes 20 seconds, and at 2.5 Mbps about 1 hour 46 minutes. Wi-Fi, other devices on the network, a busy receiving server or a laptop on battery can each take a connection well below its headline figure, so a speed test taken right before you send is the only reliable input.

How many megabytes per second is 10 Mbps, and how does that give 26 minutes 40 seconds for 2 GB?

10 Mbps is 1.25 MB/s, because there are 8 bits in a byte. 2 GB is 2,000 MB, and 2,000 ÷ 1.25 = 1,600 seconds, which is 26 minutes 40 seconds. The calculator uses decimal units (1 GB = 1,000 MB); a file that Windows reports as 2 GB is about 7% larger in decimal terms and takes correspondingly longer.